IC-F310S IC-F410S

VHF AND UHF TRANSCEIVERS Simple operation with up to 8 channels Up/down switches for volume and channel selection with LED's that indicate the selected operating channel. Flexible setup Four programmable switches give access to a variety of functions and can be assigned functions for specific applications. Durable construction The highly dependable diecast aluminum chassis and polycarbonate front panel are resistant to impact. Multiple signalling systems CTCSS and DTCS encoder/decoder are standard; 2-tone/5-tone encoder (decoder optional) and SmarTrunk IITMcapability*. * Optional UT-105 SmarTrunk II TM Logic Board is required; SmarTrunk II is a trademark of SmarTrunk Systems Inc. Optional voice scrambler Provides higher communication privacy. Up to 1020 scrambling codes (4 groups ×255 codes) with divided frequency rolling system, or 32 scrambling codes are available with optional UT-110 or UT-109, respectively. Selectable channel spacing Wide and narrow switching is available for each channel independently (12.5/25 kHz). Advanced PC programming package SADDITIONAL FEATURES Voice scrambler on/off (optional UT-109/UT-110 required) Backlit keys for night operation Emergency call with single and repeat function Automatic ID transmission linked to PTT 51 frequencies for CTCSS (plus 1 programmable) Polarity selectable for DTCS Autodialing memory for DTMF Emergency and log/ID memories available 2 priority channels Normal and priority scan Scan start at power on Automatic scan start and/or receive mute when mic. is on hook CTCSS reverse burst Automatic priority channel selection and/or mute release when mic. is off hook Optional PIN code input to prevent operation by unauthorised persons Programmable minimum level for audio output Talk around function (temporary simplex operation on a duplex channel) Time-out timer Time-out ID transmission Penalty timer Transmit lockout (channel busy / repeater / reverse repeater) 2 selectable 'stun' functions (optional UT-96 required) Compact body provides easy installation SPECIFICATIONS  GENERAL Frequency coverage* : IC-F310S   136-155 MHz 146-174 MHz   IC-F410S   400-430 MHz 440-470 MHz 470-490 MHz 490-520 MHz Number of channels* : 8 ch or 4 ch × 2 banks Type of emission : 16K0F3E (25 kHz; wide)   8K50F3E (12.5 kHz; narrow)   14K0F3E (20 kHz; middle) PLL channel step : 5 kHz and 6.25 kHz Frequency stability : ±1.5 kHz Operating temp. range : -20°C to +55°C Power supply voltage : 13.2 V DC (negative ground) Current drain : Tx   Rx    at 25 W max.audio    standby 7 A 700 mA 200 mA Antenna connector : SO-239 (50) Dimensions : 140(W) × 40(H) × 170(D) mm Weight : 1.2 kg  TRANSMITTER Output power (at 13.2 V DC) : 25 W (10 W for Italy, 6 W for IC-F310S German ver.) Modulation system : Variable reactance freq. mod. Max. freq. deviation : ±5.0 kHz (wide)   ±2.5 kHz (narrow)   ±4.0 kHz (middle) Spurious emissions : 0.25 µW Adjacent Ch. power : 70 dB (wide/middle)   60 dB (narrow) Mic. connector : 8-pin modular (600)  RECEIVER Intermediate freq. : 1st 31.05 MHz (IC-F310S)         46.35 MHz (IC-F410S)   2nd 450 kHz Sensitivity (at 20 dB SINAD) : -4dBµV (emf; IC-F310S)   -2dBµV (emf; IC-F410S) Squelch sensitivity : -4dBµV (IC-F310S)   -2dBµV (IC-F410S) Adj. Ch. selectivity : 70 dB (wide/middle)   60 dB (narrow) Spurious response : 70 dB Intermodulation : 65 dB Audio output power : 3.5 W at 10% distortion /4load Ext. SP connector : 2-conductor 3.5 (d) mm (1/8") /4 Supplied Accessories Hand mic.* DC power cable Fuses Mounting bracket kit Key assign stickers * Varies according to version. Measurements made in accordance with ETS 300 086. All stated specifications are typical and subject to change without notice or obligation. OPTIONS UT-96 5-TONE UNIT Provides 2-tone and 5-tone decoder capabilities UT-105 SmarTrunk IITM Logic Board* Provides SmarTrunk IITM capabilities. * SmarTrunk II is a trademark of SmarTrunk Systems Inc. UT-109/UT-110 VOICE SCRAMBLER UNITS Provides operating security. Ask your dealer for details about usable version, etc. UT-109: Non-rolling type. UT-110: Rolling type. OPC-617 ACC CABLE For external terminal connection. SP-5/SP-10/SP-22 EXTERNAL SPEAKERS Compact and easy-to-install. Input impedance: 4; Max. input power: 5 W HM-100N/TN HAND/DTMF MICROPHONE Supplied microphone. Varies with version.

Products    Home